task cycle time 0.2~1ms.
1. support servo system with close loop control
2. hydraulic servo valve control
3. accumulator with servo valve control
4. servo motor with linear / non-linear control
5. support multi-axes linear processing
6. all curved characteristic outputs support non-mutation control.
hardware replacement:
• hydraulic controller
• temperature controller
auto regulate pid temperature control
• self-regulate each section of pid parameters. temperature control accuracy up to 1ºc.
• each section of temperature control has tolerance setting and alarm functions.
• function detection with alarm to thermocouple and heater band
• barrel and nozzle pre-heating and standby function
• temperature control can be used for hot runner system.
user-friendly controller interface:
parameters such as heating, injection, mold open/close, carriage movement, air blow, core pull:
easy to operate and all are displayed in realtime
toolbox:
humanistic toolbox: various functions such as file manager, printing, email, take video, photos, send message, internet on phone and ask for technical support via internet
buttons and safety protection to basic operation (screen protection):
realtime display and alarm:
powerful alarm function: alarm with detailed information for troubleshooting quickly
realtime display: platen/ejector/injection position, cycle time, cooling time, system pressure, system flow, flow of proportional valve for clamping, mold open, plasticizing, flow of auxiliary pump etc.
special function:
1. by using a pressure sensor, mold open/close protection can be performed by a pressure characteristic curve with tolerance settings.
2. mold open/close parameters auto set: only set the mold opening stroke and max. speed of mold open/closed. all other parameters of the mold open/close process will be set by program automatically.
3. support real characteristic curves of moving platen and cross head during mold open/close process
4. mold open/close can be adjusted visually
5. support three different switch over modes as well as combine mode which means two or three modes can be combined by “and” or “or”
